1. Home
  2. Discontinued Products
  3. Variable Speed Drive Screw Air Compressor

Variable Speed Drive Screw Air Compressor

Features of VSD Screw Air Compressor
1. Flow adjustable, Cost controllable

The VSD (Variable Speed Drive) models adjust the motor rotation speed according to the actual air demand automatically. The reduced system pressure decreases the total energy consumption of the whole system.
The variable speed drive compressors reduce the energy consumption through the following points:
1. Removing the low efficiency transformation process from the full loading to unloading
2. Avoiding the power during the unloading process
3. Keeping the pipeline pressure belt under 0.1bar
4. Reducing the average working pressure
5. Lowering the system pressure to reduce the system leakage
6. A flexible choice from 4 to 13bar which reduces the power consumption most.

2. Protection function
1.In continuous operation on overload and over current protection
2.Through the frequency hopping and turning management to protect the machine
3.Under load, overload and zero velocity detection device protect the device.
4.Through multiple fault management and configuration alarm group to protect.

Components of Variable Speed Drive Air Compressor
1. Efficient and reliable motor

Use more efficient and reliable operate continuously motor which have passed the CE authentication, ingress protection IP23, class F insulation grade.

2. High quality and reliable valve
Thousands of reliability and safety testing ensure the quality and durability of inlet valve, minimum pressure valve, thermostatic valve, safety valve.

3. High-quality filter
Adopt own brand oil-air separator, oil filter, air filter element, safe and reliable. Oil-air separator separate thoroughly which oil content less than 3 PPM; Air filter and oil filter are efficiency and long service life.

4. Oil-air separator
The highly efficient oil-air separator presents triple separation of centrifugal, gravity and filtration, leading the remaining oil less than 3ppm.

1st Separation: Centrifugal
The mixture of compressed air inside the compressor and the oil revolve in the separator under the centrifugal force.

2nd Separation: Gravity
After the centrifugal separation, the oil-air mixture punches the inside wall of oil-air vessel, and flow to the bottom of the vessel. At the bottom, the magnetic filter removes the iron powder and other small metals sucked together with air, preventing the scratch of separator.

3rd Separation: Filtration
It adopts the folding oil-air separator to increase the area.
With the fiber as the main body, the cylinder filter collects the atomizing lubricant from the air.

5. English/ Chinese LCD microcomputer touching panel
Screw air compressor control system is applied in English and Chinese LCD touching controller. Support the remote control and chain control. Communication port for RS 485, Modbus communication protocols, can choose other communication agreement.

1) Features of microcomputer controller
1. English and Chinese LCD touching panel;
2. All-round protection of motor with short circuit, plugging turn, phase lack, overload, unbalance;
3. The starting and stopping control of the motor;
4. Protection and measurement of compressor reversal protection;
5. The multiple temperature detection and display;
6. Automatic adjustment of compressor loading, ensure the stabilization of pressure;
7. Long-distance or local control;
8. Multi-machine or single machine operation control;
9. RS-485 communication function;
10. GPRS mobile remote control. (Optional)

2) Microcomputer controller warnings and prompt functions
1. Warning indication of air filter replacement;
2. Warning indication of oil filter replacement;
3. Warning indication of oil-air separator replacement;
4. Warning indication of oil replacement.

3) Microcomputer controller safety protection
1. Protection motor: compressor motor protection of short circuit, plugging turn, phase lack, three phase power imbalance;
2. Compressed air high temperature protection;
3. Protection of compressor reversal;
4. Protection of excessive pressure;
5. Protection of temperature sensor and pressure sensor;

Applications of Variable Speed Drive Compressor
Jufeng air compressor is widely used in all kinds of industries around the world, including electronics, electricity, water, electricity, environmental protection, petroleum, chemical, mining, metallurgy, pharmaceutical, food, aviation, shipbuilding, military, scientific research, wood, textile, printing, glass, construction, building materials and other fields.

Air compressors can be grouped into three classifications: consumer grade, professional grade and industrial grade.
• Consumer grade air compressors can be described as a pancake or single-stage model. They're used for household tasks like inflating tires and inflatable products and possibly some low-load air tools like staplers and brad guns.
• Professional grade air compressors provide more power and higher pressurized air. They could be two-stage reciprocating models or rotary screw models and can provide more power to run several air tools at once with intermittent use.
• Industrial grade air compressors will be the workhorse of a manufacturing plant or the reliable power source on an oil rig. They are designed to provide a steady flow of compressed air for long periods of time and can take fluctuating surges in use typical in major manufacturing plants. These compressors are built with high-quality components that allow for customization to the specific environment to improve performance, energy efficiency and reliability.

Precautions of Variable Speed Drive Compressor
1. Srandard Power: 380V/50HZ/3PH, 415V/220V/60HZ and other voltage can be customized.
2. Starting method: 10A or below direct starting,15A or above star-delta srarting.
3. Working environment temperature: -5℃-45℃;
4. Driven method: Belt driven / Direct driven.
5. Welcome request & inquiry of customized the pressure up to 16 bar
6. The company on product improvement and reserves the right of design improvement parameters are subject to change without prior notice.

About the maintenance:
1st maintenance: After 500 hours of running
2nd and subsequent maintenance: Every 2000 to 2500 hours of running

Technical Parameters
Belt Drive Air Compressor
Model Power FAD (m³/min) Pressure (Mpa) Dimension L*W*H Weight (kg) Noise Outlet Pipe Diameter
JF-7.5A 5.5kw 0.85 0.7 800×720×950 240kg 62±2 G1/2"
0.78 0.8
0.65 1
0.55 1.2
0.48 1.3
JF-10A 7.5kw 1.2 0.7 800×720×950 250 kg 64±2 G1/2"
1.1 0.8
0.9 1
0.75 1.2
0.65 1.3
JF-15A 11kw 1.65 0.7 950×800×1160 350 kg 66±2 G3/4"
1.5 0.8
1.3 1
1.1 1.2
1 1.3
JF-20A 15kw 2.5 0.7 950×800×1160 400 kg 67±2 G3/4"
2.3 0.8
2.1 1
1.9 1.2
1.7 1.3
JF-25A 18.5kw 3.2 0.7 1150×900×1380 550 kg 69±2 G1"
3 0.8
2.7 1
2.4 1.2
2.1 1.3
JF-30A 22kw 3.8 0.7 1150×900×1380 600 kg 69±2 G1"
3.6 0.8
3.2 1
2.7 1.2
2.3 1.3
JF-40A 30kw 5.3 0.7 1150×900×1380 650 kg 71±2 G1"
5 0.8
4.5 1
4 1.2
3.6 1.3
JF-50A 37kw 6.8 0.7 1320×1000×1500 800 kg 72±2 G11/2"
6.2 0.8
5.6 1
5 1.2
4.5 1.3
JF-60A 45kw 7.4 0.7 1320×1000×1500 900 kg 73±2 G11/2"
7 0.8
6.2 1
5.6 1.2
5 1.3
JF-75A 55kw 10 0.7 1600×1170×1580 1300 kg 74±2 G11/2"
9.2 0.8
8.5 1
7.6 1.2
6.9 1.3
Direct Drive Air Compressor
Model Power FAD (m³/min) Pressure (Mpa) Dimension (L*W*H) Weight (kg) RPM Noise Outlet Pipe Diameter
JF-10AZ 7.5kw 1.2 0.7 1000×700×900 210kg 1470 65±2 G1/2"
1.1 0.8
1.7 0.5
JF-15AZ 11kw 1.8 0.7 1050×750×1000 380kg 2920 67±2 G3/4"
1.7 0.8
2.5 0.5
JF-20AZ 15kw 2.4 0.7 400kg 67±2 G3/4"
2.3 0.8
1.8 1
1.7 1.2
3.2 0.5
JF-25AZ 18.5kw 3.2 0.7 1380×850×1160 510kg 2940 69±2 G1"
3 0.8
2.6 1
2.5 1.2
JF-30AZ 3.9 0.5 70±2 G1"
22kw 3.8 0.7 520kg
3.6 0.8
3.1 1
2.9 1.2
JF-40AZ 5.3 0.5 1380×850×1160 610kg
30kw 5.2 0.7 2950 72±2 G1"
5 0.8
4.2 1
4 1.2
JF-50AZ 6.8 0.5 1500×1000×1320 750kg 72±2 G11/2 "
37kw 6.7 0.7
6.2 0.8
5.2 1
5 1.2
JF-60AZ 7.4 0.5 1500×1000×1320 760kg 74±2 G11/2 "
45kw 7.4 0.7
7 0.8
6.3 1
6 1.2
JF-75AZ 10.1 0.5 1900×1250×1600 1200kg 2970 76±2 G2"
55kw 10 0.7
9.6 0.8
8 1
7.6 1.2
JF100AZ 13.5 0.4 2000×1250×1670 1350kg 76±2 G2"
13.4 0.5
75kw 13.4 0.7
12.6 0.8
11 1
10.5 1.2
JF-120AZ 75kw 16.4 0.4 1570kg 2970 78±2 G2"
16.2 0.5
90kw 16 0.7
15 0.8
13 1
12.5 1.2
JF-150AZ 75kw 21.2 0.4 2500×1470×1840 2150kg 78±2 G21/2 "
90kw 21.1 0.5
110kw 21 0.7
19.8 0.8
17 1
16.4 1.2
JF-175AZ 90 kw 24.8 0.4 2500×1470×1840 2190kg 2970 78±2 G21/2 "
110 kw 24.6 0.5
132 kw 24.5 0.7
23.2 0.8
20 1
19.4 1.2
JF-200AZ 110 kw 29 0.4 3000×1600×1840 2650kg 81±2 G21/2 "
132 kw 28.7 0.5
160kw 28.7 0.7
27.6 0.8
23.5 1
22.8 1.2
JF-250AZ 132kw 32.5 0.4 3000×1600×1840 2720kg 2975 81±2 G21/2 "
160kw 32.2 0.5
185kw 32 0.7
30.4 0.8
27.4 1
26.8 1.2
JF-300AZ 160kw 36.5 0.4 3200×1980×2150 4150kg 84±2 G3" /DN100
185kw 36.2 0.5
220kw 36 0.7
34.3 0.8
30 1
29.2 1.2
JF-350AZ 185kw 42.8 0.4 3200×1980×2150 4500kg 2980 84±2 G3" /DN100
220kw 42.4 0.5
250kw 42 0.7
40.5 0.8
36.2 1
35.5 1.2
JF-430AZ 220kw 52 0.4 3800×2000×2050 86±2 G3" /DN110
250kw 51.3 0.5
315kw 51 0.7
50.2 0.8
41.5 1
40.5 1.2
JF-480AZ 315kw 66 0.5 3800×2000×2050 2980 84±2 DN125
355kw 65.2 0.7
62 0.8
54.5 1
46.8 1.2
JF-540WZ 400kw 73.5 0.7 3500×2000×2050 84±2 DN150
72 0.8
63.1 1
54.2 1.2

Guangdong Jufeng Machinery Manufacturing Co., Ltd. (FACTORY)

Add.: C1.C7.C17 Huachuang Animation industrial park, Panyu District, Guangzhou.
Contact: Jordan